LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2014 >> Sienna Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Monitor System (Diagnostic Codes & Circuit Tests) >> Blind Spot Monitor System >> DTC C1AC2: Slave Module Horizontal Axis Misalignment [08/2013 - ] >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

NOTE:

When checking for DTCs, make sure that the blind spot monitor main switch (warning canceling switch assembly) is on.

scientia non olet · About LEMON Manuals