Service Data [08/2013 - ]
SKID CONTROL BUZZER
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) voltage → Terminal 1 | Skid control buzzer sounds |
| Battery negative (-) → Terminal 2 |
VSC OFF SWITCH
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 6 (+) - 3 (E) | Switch is pushed in | Below 1 Ω |
| 6 (+) - 3 (E) | Switch is not pushed in | 10 kΩ or higher |
BRAKE PEDAL LOAD SENSING SWITCH
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 2 (FSW+) - 1(GND) | Brake pedal load sensing switch OFF (Brake pedal depressed) | 950 to 1050 Ω |
| 2 (FSW+) - 1(GND) | Brake pedal load sensing switch ON (Brake pedal released) | 203 to 223 Ω |