LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2015 >> Corolla L, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Intake / Exhaust System (2ZR-FAE) (Service Information) (Model Code: ZRE172)) >> Exhaust Pipe >> Removal [08/2013 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [08/2013 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE HEATED OXYGEN SENSOR 

    Refer to REMOVAL [08/2013 - ]

  2. REMOVE TAIL EXHAUST PIPE ASSEMBLY 
    1. Remove the 2 bolts and 2 compression springs.
      GTY433175Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the tail exhaust pipe assembly from the 2 exhaust pipe supports.
    3. Remove the gasket from the front exhaust pipe assembly (TWC: Front and Rear Catalyst).
  3. REMOVE FRONT FLOOR UNDER REAR REINFORCEMENT 
    1. Remove the 2 bolts and front floor under rear reinforcement.
      GTY436762Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE FRONT EXHAUST PIPE ASSEMBLY (TWC: Front and Rear Catalyst) 
    1. Remove the 2 bolts and 2 compression springs.
      GTY433169Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the front exhaust pipe assembly (TWC: Front and Rear Catalyst) from the 2 exhaust pipe supports.
    3. Remove the gasket from the exhaust manifold.
scientia non olet · About LEMON Manuals