Customize Parameters [08/2016 - ]
WARNING: This page is about a different car, the 2019 Toyota Corolla, 2018 Toyota Corolla, and 2017 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- CUSTOMIZE LANE DEPARTURE ALERT SYSTEM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
- Customizing with the Multi-information display
- Turn the ignition switch to ON.
- Enter the following menus: Settings Tab / Settings / Lane Departure Alert Setup.
- Select the setting by referring to the table below.
- Change the settings of the lane departure alert system using the steering pad switch assembly.
HINT:
Each item is displayed on the "Setting" screen on the multi-information display.
LANE DEPARTURE ALERT SYSTEMDisplay Content Setting Default Steering Assist LDA steering control function On/Off On Warning Sensitivity Timing of lane departure alert High/Standard Standard Vehicle Sway Warning Vehicle sway warning function On/Off On Sway Sensitivity Sway warning sensitivity High/Standard/Low Standard