DTC C15C3/75: Brake System Control Module Malfunction [08/2014 - ]: Procedure

1. Check for DTCs in the vehicle stability control system. Refer to DTC CHECK / CLEAR [08/2014 - ] .
   RESULT
   
   

   Result	Proceed to
   DTC is not output	OK
   DTC is output	NG

NG → See step   4 

OK: Go to next step 

1. Using the Techstream, check if the CAN communication system is functioning normally. Refer to DIAGNOSIS SYSTEM [08/2014 - ] .
   RESULT
   
   

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

B → See step   5 

A → See step   3