Installation [08/2014 - ]

WARNING: This page is about a different variant/trim than selected.

INSTALL ENGINE COOLANT TEMPERATURE SENSOR
HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor. Refer to INITIALIZATION [08/2014 - ] .
1. Install the engine coolant temperature sensor through a new gasket.
  
  Fig 1: Identifying E.F.I. Engine Coolant Temperature Sensor, Connector & O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 20 N*m (200 kgf*cm, 14 ft.*lbf)
2. Connect the engine coolant temperature sensor connector.
INSTALL INVERTER RESERVE TANK ASSEMBLY See step 2
INSTALL EGR WITH COOLER PIPE SUB-ASSEMBLY
1. Install the EGR with cooler pipe sub-assembly. Refer to INSTALLATION [08/2014 - ] .
PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing the engine coolant temperature sensor. Refer to INITIALIZATION [08/2014 - ] .