Installation [08/2014 - ]

WARNING: This page is about a different variant/trim than selected.

INSTALL DCM (TELEMATICS TRANSCEIVER)
INSTALL NO. 3 TELEPHONE BRACKET
1. Install the No. 3 telephone bracket with the 2 screws.
  
  Fig 1: View Of No. 3 Telephone Bracket & Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 TELEPHONE BRACKET
1. Install the No. 2 telephone bracket with the 2 screws.
  
  Fig 2: View Of No. 2 Telephone Bracket & Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET
1. Install the DCM (telematics transceiver) with bracket with the 3 bolts.
  
  Fig 3: Locating DCM (Telematics Transceiver) With Bracket, Connectors & Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 3 connectors.
INSTALL BACK-UP BATTERY WITH BRACKET See step 3
INSTALL UPPER INSTRUMENT PANEL ASSEMBLY
HINT:

Refer to the procedure from Install Upper Instrument Panel Assembly. Refer to INSTALLATION [08/2014 - ] .
DCM ACTIVATION
1. When replacing the DCM (telematics transceiver), perform DCM activation. Refer to DCM ACTIVATION [08/2014 - ] .