Installation [08/2014 - ]

HINT: 

Perform "Inspection After Repair" after replacing a spark plug. Refer to INITIALIZATION [08/2014 - ] .

1. Using a 14 mm spark plug wrench, install the 4 spark plugs.
   Fig 1: Identifying Spark Plug Wrench & Spark Plugs

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

HINT: 

Perform "Inspection After Repair" after replacing an ignition coil assembly. Refer to INITIALIZATION [08/2014 - ] .

1. Install the 4 ignition coils with the 4 bolts.
   Fig 2: Identifying Ignition Coil Connectors & Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   NOTE:

   When installing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.

2. Connect the 4 ignition coil connectors.

1. Install the windshield wiper motor and link. Refer to INSTALLATION [08/2014 - ] .

1. Perform "Inspection After Repair" after replacing a spark plug or ignition coil assembly. Refer to INITIALIZATION [08/2014 - ] .