April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [08/2014 - ]

WARNING: This page is about a different variant/trim than selected.

CHECK DTC
1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
5. Read the DTC by following the prompts on the Techstream screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
5. Clear the DTC by following the directions on the Techstream screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.