DTC C1A0C: Object Recognition Camera Region Code Mismatch [08/2014 - ]: Procedure

REPLACE LANE RECOGNITION CAMERA SENSOR ASSEMBLY
1. Replace the lane recognition camera sensor assembly. Refer to REMOVAL [08/2014 - ] .
2. Adjust the lane recognition camera sensor assembly. Refer to ADJUSTMENT [08/2014 - ] .
NEXT: Go to next step
CHECK DTC OUTPUT (PRE-COLLISION SYSTEM)
1. Using the Techstream, enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
2. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2014 - ] .
3. Turn the power switch off.
4. Turn the power switch on (IG).
5. Drive the vehicle.
6. Recheck for DTCs.
  OK
  
  DTC C1A0C is not output.
NG → See step 3

OK → END
REPLACE DRIVING SUPPORT ECU. Refer to REMOVAL [08/2014 - ]