DTC B2090: Driving Support System Malfunction [08/2014 - ]: Procedure

1. Check DTCs for dynamic radar cruise control system. Refer to DTC CHECK / CLEAR [08/2014 - ] .

   OK

   Dynamic radar cruise control system DTCs are not output.

NG → See step   5 

OK: Go to next step 

1. Using the Techstream, enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
2. Check for DTCs. Refer to DTC CHECK / CLEAR [08/2014 - ] .

   OK

   "Pre-Collision 2" DTC is not output.

   Result

   Result	Proceed to
   OK (with Lane Keeping Assist System)	A
   OK (without Lane Keeping Assist System)	B
   NG	C

B → See step   4 

C → See step   6 

A: Go to next step 

1. Adjust the lane recognition camera sensor assembly. Refer to ADJUSTMENT [08/2014 - ] .

NEXT: Go to next step 

1. Using the Techstream, enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.
2. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2014 - ] .
3. Recheck for DTCs.

   OK

   DTC B2090 is not output.

NG → See step   7 

OK → END