DTC P0630: VIN not Programmed or Mismatch - ECM / PCM [08/2014 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read the DTCs.
   RESULT
   
   

   Result	Proceed to
   DTC P0630 is output	A
   DTC P0630 and other DTCs are output	B

   NOTE:

   If P0630 is stored, the VIN must be input to the ECM using the Techstream. However, all DTCs are cleared automatically by the Techstream when inputting the VIN. If DTCs other than P0630 are output, check them first.

   HINT: 

   If any DTCs other than P0630 are output, troubleshoot those DTCs first.

B → See step   3 

A: Go to next step 

1. Input the VIN. Refer to REGISTRATION [08/2014 - ] .

NEXT → END