LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2015 >> Prius Two >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Theft Deterrent System / Keyless Entry System (Service Information) & Diagnostics (Plug-In)) >> Push-Button Start >> DTC Check / Clear [08/2014 - ] >> DTC Check / Clear [08/2014 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [08/2014 - ]

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC (Certification ECU (Smart Key ECU Assembly)) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
    5. Check the details of the DTC(s).
  2. CHECK DTC (Power Management Control ECU) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
    5. Read the DTC by following the prompts on the Techstream screen.
  3. CLEAR DTC (Certification ECU (Smart Key ECU Assembly)) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
    5. Clear the DTCs.
  4. CLEAR DTC (Power Management Control ECU) 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
    5. Clear the DTC by following the directions on the Techstream screen.

    HINT: 

    Refer to the Techstream operator's manual for further details.

scientia non olet · About LEMON Manuals