DTC Check/Clear [11/2014 - ]

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
5. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE TABLE [11/2014 - ] .

HINT: 

As the driving support ECU assembly output DTCs for the pre-collision system, be sure to check the Pre-Collision and Pre-Collision 2 DTCs.

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
5. Clear the DTCs.

HINT: 

As the driving support ECU assembly output DTCs for the pre-collision system, be sure to clear the Pre-Collision 2 DTCs.