LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2016 >> 4Runner TRD Pro >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Confirmation Of Transmitter Id Registration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Confirmation Of Transmitter Id Registration

NOTE:
  • It may take about 2 or 3 minutes until the values are displayed. If the values are not displayed after a few minutes, perform troubleshooting according to the inspection procedure for DTCs C2121/21 to C2125/25 (2008-09 models) or DTCs C2121/21 to C2124/24 or C2125/25 (2010 & later models).
  • If the IDs have not been registered, DTC C2171/71 will be stored in the tire pressure warning ECU after 3 minutes or more.
  • If normal pressure values are displayed, the IDs have been registered correctly.
  • If the tire pressure values are not displayed after a few minutes, the IDs may be incorrect or the system may have a malfunction.
  • After all IDs are registered, DTC C2126/26 (Transmitter ID not Received in Main Mode) is stored in the tire pressure warning ECU and the tire pressure warning light blinks for 1 minute and then comes on. When the tire pressure warning ECU successfully receives radio waves from all the transmitters whose IDs are stored in the ECU, DTC C2126/26 is deleted and the tire pressure warning light goes off.
  1. Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
  2. Read the "ID Tire Inflation Pressure" values.
  3. Confirm that the tire pressure data of all tires (except the spare tire w/o spare tire pressure warning valve and transmitter) is displayed on the Techstream screen.
scientia non olet · About LEMON Manuals