LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2016 >> Corolla L, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Continuously Variable Transaxle (Service Information) (Model Code: ZRE172)) >> Shift Paddle Switch >> Inspection [08/2013 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection [08/2013 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) 
    1. Measure the resistance according to the value(s) in the table below.
      GTY442240Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Shift Paddle Switch (Transmission Shift Switch Assembly) LH)
      *b Component without harness connected
      (Shift Paddle Switch (Transmission Shift Switch Assembly) RH)

      Standard Resistance

      SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) LH:

      Tester Connection Condition Specified Condition
      2 (SFTD) - 3 (ECC) "-" continuously pulled Below 3 Ω
      Released 10 kΩ or higher
      2 (SFTD) - 4 (ECC1) "-" continuously pulled Below 3 Ω
      Released 10 kΩ or higher

      If the resistance values are not as specified, replace the shift paddle switch (transmission shift switch assembly) LH.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) RH:

      Tester Connection Condition Specified Condition
      3 (SFTU) - 2 (ECC1) "+" continuously pulled Below 3 Ω
      Released 10 kΩ or higher

      If the resistance values are not as specified, replace the shift paddle switch (transmission shift switch assembly) RH.

scientia non olet · About LEMON Manuals