Monitor Description
The ECM monitors the signals received from the No. 1 throttle position sensor and stop light switch assembly. As the ECM monitors the STP signal of the stop light switch assembly and the No. 1 throttle position sensor, if these signals do not correlate, this DTC is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P060E | Internal Control Module Throttle Position Performance | Either of the following conditions is met (1 trip detection logic):
|
ECM | Comes on | DTC stored | DTC for Mexico Models - Applies |