Freeze Frame Data [06/2015 - ]

FREEZE FRAME DATA

HINT:

The FC boost control ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored. It can be used for estimating or duplicating the vehicle conditions that were present when the malfunction occurred. To confirm the details of the FC boost control system, check the detailed information for the DTC information code in the Data List (INF code).

Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Powertrain / FCDC / Trouble Codes.
Powertrain > FCDC > Trouble Codes
Select a DTC in order to display its freeze frame data.
Check the freeze frame information recorded with the DTC.
HINT:
- For detailed information and specified values for each item, refer to the corresponding items in the data list /active test.
  Refer to DATA LIST / ACTIVE TEST [06/2015 - ]
- If DTCs of the EV control system and FC control system are found, record the corresponding freeze frame data as well.

Powertrain > FCDC

Tester Display
FC Voltage before Boosting
FC Voltage after Boosting
FC Current
Ignition Signal
Inverter Shutdown Request
FC Voltage Status
FC Current Status
FC Converter Voltage Status
Reactor Temperature
FC Relay (+) AD Value
FC Relay (-) AD Value
AC Impedance Relative Value
Capacitor Estimated Temperature
Reactor Total Current
Reactor Temperature Estimate Degree
Target FC Output Power
Target FC Current
FC Converter Estimated Water Temperature (U/V/W/X Total)
FC Relay (+)
FC Relay (-)
FVH (FC Converter Boosted Voltage) Over Voltage Judgment
FVL (FC Converter Before Boosting Voltage) Low Voltage Judgment
FC Converter Control
FVL (FC Converter Before Boosting Voltage) IPM Low Voltage Signal
FVH (FC Converter Boosted Voltage) IPM Over Voltage Signal
FLVL-RG Signal Status
Fail Safe Status
Target FC Voltage
Smoothed Value of FC Voltage
FC Converter Output Voltage
FC Output Power
26V Voltage AD Value
-5 Voltage AD Value
5 Voltage AD Value
U Phase IGBT Temperature
U Phase IGBT Temperature AD Value
U Phase IGBT Request Duty Ratio
U Phase Reactor Current
U Phase Reactor Current AD Value
U Phase FC Converter Estimated Water Temperature
U Phase IPM Fail Signal Judgment (Over Heat)
U Phase IPM Fail Judgment (Over Current)
U Phase IPM Fail Signal
U Phase Fail Safe Status
U Phase FC Converter Shutdown Request
U Phase Reactor Current Status
U Phase Element Estimated Temperature
V Phase IGBT Temperature
V Phase IGBT Temperature AD Value
V Phase IGBT Request Duty Ratio
V Phase Reactor Current
V Phase Reactor Current AD Value
V Phase Reactor Temperature AD Value
V Phase FC Converter Estimated Water Temperature
V Phase IPM Fail Signal Judgment (Over Heat)
V Phase IPM Fail Judgment (Over Current)
V Phase IPM Fail Signal
V Phase Fail Safe Status
V Phase FC Converter Shutdown Request
V Phase Reactor Current Status
V Phase Element Estimated Temperature
W Phase IGBT Temperature
W Phase IGBT Temperature AD Value
W Phase IGBT Request Duty Ratio
W Phase Reactor Current
W Phase Reactor Current AD Value
W Phase FC Converter Estimated Water Temperature
W Phase IPM Fail Signal Judgment (Over Heat)
W Phase IPM Fail Judgment (Over Current)
W Phase IPM Fail Signal
W Phase Fail Safe Status
W Phase FC Converter Shutdown Request
W Phase Reactor Current Status
W Phase Element Estimated Temperature
X Phase IGBT Temperature
X Phase IGBT Temperature AD Value
X Phase IGBT Request Duty Ratio
X Phase Reactor Current
X Phase Reactor Current AD Value
X Phase FC Converter Estimated Water Temperature
X Phase IPM Fail Signal Judgment (Over Heat)
X Phase IPM Fail Judgment (Over Current)
X Phase IPM Fail Signal
X Phase Fail Safe Status
X Phase FC Converter Shutdown Request
X Phase Reactor Current Status
X Phase Element Estimated Temperature
Battery Voltage
Total Distance Traveled
Detail Code 1
Detail Code 2
Detail Code 3
Detail Code 4
Detail Code 5