Customize Parameters [06/2017 - ]
- CUSTOMIZE POWER WINDOW CONTROL SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Power Window.
- Select the setting by referring to the table below.POWER WINDOW
Tester Display Description Default Setting ECU D Window Auto Up Function to enable or disable the auto up function for the driver door power window using the power window regulator master switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly LH (for Driver Door) D Window Auto Down Function to enable or disable the auto down function for the driver door power window using the power window regulator master switch assembly ON 0:OFF, 1:ON Power window regulator motor assembly LH (for Driver Door)