Data List / Active Test [11/2015 - 06/2017]
- DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTE:In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
- Turn the ignition switch off.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Occupant Detection / Data List.
- Check the values by referring to the table below.OCCUPANT DETECTION
Tester Display Measurement Item/Range Normal Condition Diagnostic Note IG Switch Ignition switch condition/
ON: Ignition switch ON (IG)
OFF: Ignition switch offON/OFF - Passenger Buckle SW Passenger side buckle switch/
Set: The seat belt is fastened
Unset: The seat belt is not fastened
NG: Data is not determinedSet/Unset - Passenger Classification Passenger classification/
AM50: Adult is seated. (More than 39 kg (86.0 lb) is detected.)
AF05: Adult is seated. (17 to 39 kg (37.5 to 86.0 lb) is detected.)
Child: Child is seated. (Less than 17 kg (37.5 lb) is detected.)
CRS: Child restraint system is installed. (Less than 16 kg (35.3 lb) is detected and the passenger side buckle switch is on.)
OFF: VacantAM50/AF05/Child/CRS/OFF The weight detected by the system is not always consistent with actual occupant's weight. Sensor Range Info Sensor range information/
OK: AlwaysOK As sensor range is not set, OK is always displayed FL Sensor Range Info Front left sensor range information/
OK: AlwaysOK - for Front Passenger Seat (Type A)
- As front left sensor range is not set, OK is always displayed
RL Sensor Range Info Rear left sensor range information/
OK: AlwaysOK As rear left sensor range is not set, OK is always displayed RR Sensor Range Info Rear right sensor range information/
OK: AlwaysOK - for Front Passenger Seat (Type B)
- As rear right sensor range is not set, OK is always displayed
FL Sensor Voltage Front left sensor voltage/
Min.: 0.000 V
Max.: 19.800 V0.000 to 5.000 V for Front Passenger Seat (Type A) RL Sensor Voltage Rear left sensor voltage/
Min.: 0.000 V
Max.: 19.800 V0.000 to 5.000 V - RR Sensor Voltage Rear right sensor voltage/
Min.: 0.000 V
Max.: 19.800 V0.000 to 5.000 V for Front Passenger Seat (Type B) FL Sensor Weight Info Front left sensor weight information/
Min.: -10.00 kg (-22.05 lb)
Max.: 20.00 kg (44.09 lb)-10.00 to 20.00 kg
(-22.05 to 44.09 lb)for Front Passenger Seat (Type A) RL Sensor Weight Info Rear left sensor weight information/
Min.: -10.00 kg (-22.05 lb)
Max.: 30.00 kg (66.13 lb)-10.00 to 30.00 kg
(-22.05 to 66.13 lb)- RR Sensor Weight Info Rear right sensor weight information/
Min.: -10.00 kg (-22.05 lb)
Max.: 30.00 kg (66.13 lb)-10.00 to 30.00 kg
(-22.05 to 66.13 lb)for Front Passenger Seat (Type B) Total Weight Information Total weight information/
Min.: -40.00 kg (-88.19 lb)
Max.: 100.00 kg (220.46 lb)-40.00 to 100.00 kg
(-88.19 to 220.46 lb)- Number of Present DTC Number of present DTC recorded/
Min.: 0, Max.: 2550 - Number of Past DTC Number of past DTC recorded/
Min.: 0, Max.: 2550 -