LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2016 >> Prius Three >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System - Diagnostics - Introduction >> Wiper And Washer System >> Customize Parameters [11/2015 - ] >> Customize Parameters [11/2015 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [11/2015 - ]

  1. RAIN SENSOR CUSTOMIZE (w/ Auto wiper system) 
    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the power switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Body Electrical / Wiper / Utility / Customize.
      5. Select the setting by referring to the table below.

        Wiper 

        Tester Display Description Default Setting ECU
        Auto Wiper Function to enable AUTO wiper operation (w/ Rain Sensor) Avail 0:Avail, 1:Not Avl Rain Sensor

        HINT: 

        Changes to the customize settings will not be applied until the power switch is turned off then on (IG).

scientia non olet · About LEMON Manuals