LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2016 >> Prius Three >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Automatic Headlight Beam Level Control System - Diagnostics - Introduction) >> Automatic Headlight Beam Level Control System >> Fail-Safe Chart [12/2018 - ] >> Fail-Safe Chart [12/2018 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fail-Safe Chart [12/2018 - ]

WARNING: This page is about a different car, the 2022 Toyota Prius, 2021 Toyota Prius, 2020 Toyota Prius, and 2019 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. FAIL-SAFE FUNCTION 
    1. No. 1 headlight ECU sub-assembly
      1. The No. 1 headlight ECU sub-assemblies stop light operation if any of the following malfunctions are detected.
        Malfunction Multi-information Display Warning DTC Output
        Lighting on/off LED light source malfunction Low beam Displayed Output
        High beam Not Displayed Not output
        Other than above (communication with main body ECU (multiplex network body ECU)) Displayed Output
        Automatic headlight beam level control system Displayed Output
        AFS (adaptive front-lighting system) Displayed Output
        Power supply IG voltage line malfunction Displayed Output
        Other than an IG voltage line malfunction Not displayed Not output
scientia non olet · About LEMON Manuals