Installation [12/2015 - 08/2016]: Procedure

1. Set the front engine mounting insulator in place using the 3 bolt holes.
2. Install the transverse engine mounting bracket to the front engine mounting insulator assembly.
   1. Install the bolt to the transverse engine mounting bracket.

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 87 N*m (887 kgf*cm, 64 ft.*lbf) 

   2. Install the 2 bolts and the nut.

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 64 N*m (653 kgf*cm, 47 ft.*lbf) 

1. Install the front engine mounting insulator assembly with the 3 nuts.

   Torque: 58 N*m (591 kgf*cm, 43 ft.*lbf) 

2. Connect the duty vacuum switching valve connector.
3. Engage the wire harness clamp.

(Refer to INSTALLATION [12/2015 - 08/2016] )