LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> 4Runner TRD Pro >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can Communication System - Circuit Tests (2 Of 3) >> Can Communication System >> Navigation Receiver Assembly Communication Stop Mode [08/2015 - 08/2019] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Navigation Receiver Assembly Communication Stop Mode [08/2015 - 08/2019]: Description

Detection Item Symptom Trouble Area
Navigation Receiver Assembly Communication Stop Mode Either condition is met:
  • "Display and Navigation (AVN1)" is not displayed on the "Bus Check" screen.
  • "Navigation Receiver Assembly Communication Stop Mode" in "DTC Combination Table" applies.
  • Power source or inside navigation receiver assembly
  • Navigation receiver assembly branch wire or connector
  • Navigation Receiver Assembly

HINT: 

For vehicles with a navigation receiver assembly only.