LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> 4Runner TRD Pro >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Power Window Control System - Diagnostic Codes & Symptom Tests >> Power Window Control System >> Key-off Operation Function Operates even if Operating Conditions are not Satisfied [08/2015 - 08/2019] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key-off Operation Function Operates even if Operating Conditions are not Satisfied [08/2015 - 08/2019]: Procedure

  1. CHECK LIN COMMUNICATION SYSTEM 
    1. Check for LIN communication system DTCs related to the power window control system. (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ] ).

      OK

      LIN communication system DTCs are not output.

    Result: 

    NG 

    GO TO LIN COMMUNICATION SYSTEM 

    (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ] )

    Result: 

    OK 

    See step  2

  2. CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION SWITCH OFF 
    1. Check the power window operation function after the ignition switch is turned off. (Refer to OPERATION CHECK [08/2015 - 08/2019] ).
      RESULT

      Result Proceed to
      Front side door is opened within 43 sec. but power windows can still operate A
      43 sec. pass and power windows can still operate B

    Result: 

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) 

    (Refer to REMOVAL [08/2015 - 08/2019] )

    Result: 

    See step  3

  3. READ VALUE USING TECHSTREAM (FRONT DOOR COURTESY LIGHT SWITCH) 
    1. Use the Data List to check if the main body ECU (multiplex network body ECU) is functioning properly. (Refer to DATA LIST / ACTIVE TEST [08/2015 - 08/2019] ).
      MAIN BODY

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      FL Door Courtesy SW Front door courtesy light switch LH signal / ON or OFF ON: Front door LH closed
      OFF: Front door LH open
      -
      FR Door Courtesy SW Front door courtesy light switch RH signal / ON or OFF ON: Front door RH closed
      OFF: Front door RH open
      -

      OK

      On tester screen, each item changes between ON and OFF according to above chart.

    Result: 

    OK 

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) 

    (Refer to REMOVAL [08/2015 - 08/2019] )

    Result: 

    NG 

    See step  4

  4. CHECK FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY 
    1. Open a front door and check that the map light illuminates. (Refer to INSPECTION [08/2015 - ] ).

      OK

      Map light illuminates.

    Result: 

    NG 

    REPLACE FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY 

    (Refer to REMOVAL [08/2015 - ] )

    Result: 

    OK 

    See step  5

  5. CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY 
    1. Temporarily replace the driver side junction block with a new or normally functioning one.
    2. Check that the key-off operation function operates normally.

    Result: 

    OK 

    END (DRIVER SIDE JUNCTION BLOCK ASSEMBLY IS DEFECTIVE) 

    Result: 

    NG 

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) 

    (Refer to REMOVAL [08/2015 - 08/2019] )