LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> 4Runner TRD Pro >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Camshaft Oil Control Valve >> Installation [08/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [08/2015 - ]: Procedure

  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2) 
    1. Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.
    2. Install the oil control valve with the bolt.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

      NOTE:
      • Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
      • Be careful that the O-ring is not cracked when installing the oil control valve.
    3. Connect the camshaft timing oil control valve connector.
  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2) 
    1. Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.
    2. Install the oil control valve with the bolt.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

      NOTE:
      • Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
      • Be careful that the O-ring is not cracked when installing the oil control valve.
    3. Connect the oil control valve connector.
  3. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1) 
    1. Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.
    2. Install the oil control valve with the bolt.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

      NOTE:
      • Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
      • Be careful that the O-ring is not cracked when installing the oil control valve.
    3. Connect the oil control valve connector.
  4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1) 
    1. Apply a light coat of engine oil to a new O-ring and install it to the oil control valve.
    2. Install the oil control valve with the bolt.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

      NOTE:
      • Do not allow foreign matter to contact the oil seal face of the oil control valve (surface which contacts the cylinder head).
      • Be careful that the O-ring is not cracked when installing the oil control valve.
    3. Connect the oil control valve connector.
  5. INSTALL NO. 1 AIR CLEANER HOSE 

    Refer to PROCEDURE - Step 9

  6. INSTALL V-BANK COVER 

    Refer to PROCEDURE - Step 14

scientia non olet · About LEMON Manuals