LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> 86 Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Wireless Door Lock Control System (W/O Smart Key) - Diagnostics - Introduction >> WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System) >> Registration [06/2016 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Registration [06/2016 - ]: Procedure

  1. REGISTRATION OF RECOGNITION CODE (USING TECHSTREAM) 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Utility / Wireless Code Registration.
    5. Press both lock and unlock switches within 1 to 1.5 seconds.
    6. Press either switch for more than 1 second within 3 seconds.
    7. Perform either of the following to complete the registration of recognition codes:
      • Use a Techstream to send a completion command.
      • Disconnect the Techstream.
    8. Perform the following after registration is completed.
      1. Perform the wireless door lock control operation check (Refer to OPERATION CHECK [06/2016 - ] ).

        HINT: 

        If the wireless door lock control does not operate, perform the registration procedure again.

scientia non olet · About LEMON Manuals