How To Proceed With Troubleshooting [06/2016 - ]: Procedure

Result

Result: 

NEXT 

See step  2

Result

Result: 

NEXT 

See step  3

1. Measure the battery voltage with the ignition switch off.

   Standard Voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  4

1. Check for DTCs.

   Refer to DTC CHECK / CLEAR [06/2016 - ] 

   Result

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

Result: 

B 

See step  7

Result: 

A 

See step  5

1. Refer to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [06/2016 - 03/2017] , or refer to PROBLEM SYMPTOMS TABLE [03/2017 - ] 

   Result

   Result	Proceed to
   Fault is not listed in Problem Symptoms Table	A
   Fault is listed in Problem Symptoms Table	B

Result: 

B 

See step  7

Result: 

A 

See step  6

1. Data List / Active Test

   Refer to DATA LIST / ACTIVE TEST [06/2016 - ] 

2. Terminals of ECU

   Refer to TERMINALS OF ECU [06/2016 - 03/2017] , or refer to TERMINALS OF ECU [03/2017 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

END