Operation Check [06/2016 - 03/2017]

CHECK POWER DOOR LOCK OPERATION
NOTE:
The operation check below is based on the non-customized initial condition of the vehicle.
1. Check the basic function.
  1. Check that all doors lock when the door lock control switch (for manual operation) is turned to lock and all doors unlock when turned to unlock.
2. Check the key lock-in prevention function.
  NOTE:
  In order to prevent the key from being actually locked-in, the following inspection should be performed with the driver side door window open.
  1. Turn the ignition switch to ON or ACC.
  2. With the driver door open, check that all doors unlock immediately after the lock side of the door control switch (for manual operation) is pressed.
3. Check the security function of the door lock control system.
  1. Close all doors and leave the driver door window open so that the door lock knob can be operated from outside the vehicle. (Step 1)
  2. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.
  3. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.
    HINT:
    
    Check that the security function of the door lock control system is canceled under the following conditions:
    - Turn the ignition switch to ON.
    - The driver door is unlocked using the key.
    - The unlock side of the door control switch (for manual operation) is pressed after the door lock knob is unlocked manually.
    - The doors are unlocked by a wireless operation.