LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> 86 Base, Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> ECM >> Removal [06/2016 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [06/2016 - ]: Procedure

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 1

  2. REMOVE INSTRUMENT SIDE PANEL RH 

    Refer to PROCEDURE - Step 11 [06/2016 - 03/2017] , or refer to PROCEDURE - Step 11 [03/2017 - ]

  3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY 

    Refer to PROCEDURE - Step 16 [06/2016 - 03/2017] , or refer to PROCEDURE - Step 16 [03/2017 - ]

  4. REMOVE CONTROL UNIT RELAY ASSEMBLY 

    Refer to PROCEDURE - Step 4

  5. REMOVE ECM 
    1. Disconnect the 4 connectors from the ECM.
    2. Remove the 2 nuts and ECM.
      GTY471602Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      If a component has been dropped or subjected to a strong impact, replace it.

  6. REMOVE ECM BRACKET 
    1. Disengage the 2 claws to remove the ECM bracket.
      GTY471603Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals