DTC B2788: IG2 Signal Malfunction [03/2017 - ]: Description
This DTC is stored when the steering lock actuator assembly (steering lock ECU) detects an IG2 power supply malfunction.
HINT:
The steering lock ECU is not connected to the CAN communication system. However, the steering lock ECU is connected to the certification ECU (smart key ECU assembly) via LIN communication and communicates with other components via CAN communication through the certification ECU (smart key ECU assembly).
| DTC No. | Detection Condition | Trouble Area | DTC Output Confirmation Operation |
|---|---|---|---|
| B2788 | Mismatch between the steering lock actuator assembly (steering lock ECU) IGN1 input from the LIN communication system and from the direct line (1-trip detection logic*). |
|
No confirmation operation is necessary (monitoring is continuous). |
- *: Only output while a malfunction is present and the engine switch is on (IG).
VEHICLE CONDITION AND FAIL-SAFE FUNCTION WHEN MALFUNCTION DETECTED
| Vehicle Condition when Malfunction Detected | Fail-safe Function when Malfunction Detected |
|---|---|
| The steering cannot be locked or unlocked. For this reason, the engine cannot be started. | - |
RELATED DATA LIST AND ACTIVE TEST ITEMS
| DTC Code | Data List Item | Active Test Item |
|---|---|---|
| B2788 | - | - |