Inspection [06/2016 - ]: Procedure
- INSPECT ENGINE OIL TEMPERATURE SENSOR TEXT IN ILLUSTRATION
*a Resistance *b Temperature *c Acceptable *d Component without harness connected
(Engine oil Temperature Sensor)- Partially soak the sensor in the water and warm up the water.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 Approximately 20°C (68°F) 2.25 to 2.65 kΩ Approximately 80°C (176°F) 0.305 to 0.331 kΩ NOTE:When checking the engine oil temperature sensor in water, keep the terminals dry. After the check, wipe the engine oil temperature sensor dry.
If the result is not as specified, replace the engine oil temperature sensor.