DTC P0111: Intake Air Temperature Sensor Gradient Too High [07/2018 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine / Trouble Codes.
5. Read DTCs.
   RESULT
   
   

   Result	Proceed to
   DTC P0111 and other DTCs are output	A
   DTC P0111 is output	B

   HINT: 

   If any DTCs other than P0111 are output, troubleshoot those DTCs first.

Result: 

A 

GO TO DTC CHART 

(Refer to DIAGNOSTIC TROUBLE CODE CHART [07/2018 - ] )

Result: 

B 

REPLACE MASS AIR FLOW METER 

(Refer to REMOVAL [06/2016 - ] )