Typical Enabling Conditions
P0616
| Monitor runs whenever following DTCs not stored | P2158 (Vehicle Speed Sensor "B" Circuit) U0416 (Invalid Data Received From Vehicle Dynamics Control Module) U0122 (Lost Communication With Vehicle Dynamics Control Module) U0073 (Control Module Communication Bus "A" Off) |
|
| Battery voltage | 8 V or more | |
| Engine speed | Increases from 0 to higher than 500 RPM | |
| Vehicle speed | Less than 1 km/h (0.6 mph) | |
| Starter relay command | On | |
P0617
| Monitor runs whenever following DTCs not stored | None | |
| Battery voltage | 8 V or more | |
| Engine speed | Higher than 500 RPM | |
| Starter relay command | Off | |