LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> 86 Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Wireless Door Lock Control System (W/O Smart Key) - Diagnostics - Introduction >> WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System) >> Customize Parameters [06/2016 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [06/2016 - ]: Procedure

  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM 
    1. Customizing with the Techstream
      NOTE:
      • When the customer requests a change in a function, first make sure that the function can be customized.
      • Record the current settings before customizing.
      • When troubleshooting a function, first make sure that the function is set to the default setting.

      HINT: 

      The following items can be customized.

      1. Connect the Techstream to the DLC3.
      2. Turn the ignition switch to ON.
      3. Turn the Techstream on.
      4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Wireless Door Lock or Others.
      5. Select the setting by referring to the table below.
        WIRELESS DOOR LOCK

        Display Default Function Setting Relevant ECU
        Wireless Control ON Function that turns wireless door lock function / OFF or ON OFF or ON Main body ECU (network gateway ECU)
        Wireless Buzzer Resp ON Wireless door lock buzzer response OFF or ON Main body ECU (network gateway ECU)
        Hazard Answer Back ON When wireless lock switch on transmitter pressed, illuminate all hazard warning lights once. When unlock switch pressed, all hazard warning lights illuminate twice. OFF or ON Main body ECU (network gateway ECU)
        Open Door Warning ON The buzzer sounds when lock is pressed when any of the doors are ajar. OFF or ON Main body ECU (network gateway ECU)
        Unlock 2 Operation ON Function that unlocks driver door when unlock switch on door control transmitter module set sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. OFF or ON Main body ECU (network gateway ECU)
        Panic Function ON Function to operate theft deterrent system by continuously pressing panic switch on door control transmitter module set sub-assembly for 1.5 seconds OFF or ON Main body ECU (network gateway ECU)
        Wireless Auto Lock ON This function turns the wireless auto lock function OFF or ON OFF or ON Main body ECU (network gateway ECU)
        Auto Lock Time 60 s Time until relocking after unlocking with wireless door lock function 30 s, 60 s or 120 s Main body ECU (network gateway ECU)
        Trunk Lid Operation Long1 Function to change the operation method of opening the luggage compartment door by the door control transmitter module set sub-assembly. 1tim ON, 2tim ON, Long1 or Long2 Main body ECU (network gateway ECU)
        Wireless Buzzer Vol Level 5 Wireless door lock buzzer volume Level 7, Level 6, Level 5, Level 4, Level 3, Level 2, Level 1 or Level 0 Main body ECU (network gateway ECU)
        OTHERS

        Display Default Function Setting Relevant ECU
        Detection of Vehicle OFF This function turns the detection of vehicle function OFF or ON. OFF or ON Main body ECU (network gateway ECU)