How To Proceed With Troubleshooting [06/2016 - ]: Procedure

Result

Result: 

NEXT 

See step  2

Standard Voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result: 

NEXT 

See step  3

1. Use the Techstream to check if the CAN communication system is functioning normally.

   Refer to DIAGNOSIS SYSTEM [06/2016 - 03/2017] , or refer to DIAGNOSIS SYSTEM [03/2017 - ]

   Result

   Result	Proceed to
   CAN DTC is not output	A
   CAN DTC is output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2016 - 03/2017]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [03/2017 - ] 

Result: 

A 

See step  4

1. Check for DTCs.

   Refer to DTC CHECK / CLEAR [06/2016 - ] 

2. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [06/2016 - ] 

3. Recheck for DTCs.

   Refer to DTC CHECK / CLEAR [06/2016 - ] 

   Result

   Result	Proceed to
   DTC output does not reoccur	A
   DTC output reoccurs	B

Result: 

B 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [06/2016 - ]  

Result: 

A 

See step  5

1. Terminals of ECU.

   Refer to TERMINALS OF ECU [06/2016 - 03/2017] , or refer to TERMINALS OF ECU [03/2017 - ] 

2. Data List / Active Test.

   Refer to DATA LIST / ACTIVE TEST [06/2016 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  6

Result

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

END