Service Data [06/2016 - ]
VEHICLE HEIGHT (UNLOADED VEHICLE)
| Front B - A | Rear C | Rear D | Rear E |
|---|---|---|---|
| 146 mm (5.75 in.) | 225 mm (8.86 in.) | 375 mm (14.76 in.) | 372 mm (14.65 in.) |
Measurement points:
- A: Ground clearance of front lower suspension arm set front bolt center
- B: Ground clearance of front wheel center
- C: Ground clearance of lower control arm set bolt center
- D: Front wheel arch height of front wheel center
- E: Rear wheel arch height of rear wheel center
CAMBER (UNLOADED VEHICLE)
| - | Camber Inclination | Right-left Difference |
|---|---|---|
| Front | 0 +/- 45' (0 +/- 0.75°) | 45' (0.75°) or less |
| Rear | -1°12' +/- 45' (-1.20° +/- 0.75°) | 45' (0.75°) or less |
CASTER (UNLOADED VEHICLE)
| - | Caster Inclination (Reference) |
|---|---|
| Front | 5°54' (5.90°) |
STEERING AXIS INCLINATION (UNLOADED VEHICLE)
| - | Steering Axis Inclination (Reference) |
|---|---|
| Front | 15°31' (15.52°) |
WHEEL TURNING ANGLE (UNLOADED VEHICLE)
| - | Inside Wheel (Reference) | Outside Wheel (Reference) |
|---|---|---|
| Front | 36°54' (43.90°) | 31°12' (31.20°) |
TOE-IN (UNLOADED VEHICLE)
| - | Specified Condition |
|---|---|
| Front | C + D: 0°00' +/- 0°11' (0.00° +/- 0.19°) |
| B - A: 0 +/- 3.0 mm (0 +/- 0.1181 in.) | |
| Rear | C + D: 0°10' +/- 0°15' (0.16° +/- 0.24°) |
| B - A: 2.0 +/- 3.0 mm(0.0787 +/- 0.1181 in.) |
DISTANCE BETWEEN THE CENTERS OF THE 2 INSTALLATION BOLTS OF THE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH AND RH
| - | Standard distance |
|---|---|
| Rear | 454.5 to 460.5 mm (17.89 to 18.13 in.) |
DISTANCE BETWEEN THE CENTERS OF THE 2 INSTALLATION BOLTS OF THE REAR NO. 2 SUSPENSION ARM ASSEMBLY
| - | Standard distance |
|---|---|
| Rear | 448.9 to 452.9 mm (17.67 to 17.83 in.) |