Installation [06/2016 - ]: Procedure
- INSTALL FRONT SPEED SENSOR LH
- Install the front speed sensor LH with the bolt.
Torque: 7.5 N*m (77 kgf*cm, 66 in.*lbf)
NOTE:Do not allow any foreign matter such as dirt or dust to enter between the steering knuckle and the front disc brake dust cover.
- Connect the 6 front speed sensor clamps.NOTE:
Securely connect the connector.
- Install the front speed sensor LH with the bolt.
- INSTALL FRONT FENDER LINER LH
Refer to PROCEDURE - Step 2
- INSTALL FRONT WHEEL LH
Torque: 120 N*m (1224 kgf*cm, 89 ft.*lbf)
- INSPECT SPEED SENSOR SIGNAL
(Refer to TEST MODE PROCEDURE [06/2016 - ] )