Inspection [06/2016 - ]: Procedure
- INSPECT AIR FUEL RATIO SENSOR
- Measure the resistance according to the value(s) the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 1.98 to 2.64 Ω 1 - 4 Always 10 kΩ or higher TEXT IN ILLUSTRATION*a Component without harness connected
(Air Fuel Ratio Sensor)If the result is not as specified, replace the air fuel ratio sensor.
- Measure the resistance according to the value(s) the table below.