Caution / Notice / Hint

HINT: 

• Read freeze frame data using the Techstream. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.
• Stop light switch assembly conditions can be checked using the Techstream.
  1. Connect the Techstream to the DLC3.
  2. Turn the ignition switch to ON.
  3. Turn the Techstream on.
  4. Enter the following menus: Powertrain / Engine / Data List / Stop Light Switch and ST1.
  5. Check the Data List indication when the brake pedal is depressed and released.

     Brake Pedal Operation	Stop Light Switch	ST1
     Depressed	ON	ON
     Released	OFF	OFF