Installation [06/2016 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.

INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)
1. Install the shift paddle switch (transmission shift switch assembly) with 4 screws.
  Torque: 1.7 N*m (18 kgf*cm, 15 in.*lbf)
2. Engage the clamp.
INSTALL STEERING WHEEL ASSEMBLY
Refer to PROCEDURE - Step 8
INSTALL STEERING PAD
(Refer to INSTALLATION [06/2016 - ] )