LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Avalon XLE Plus >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can Communication System (W/ Central Gateway Ecu) - Diagnostic Codes - Circuit & Symptom Tests - (Except Hybrid) >> CAN COMMUNICATION SYSTEM (w/ Central Gateway ECU) >> Symptom Tests >> Navigation Receiver Assembly Communication Stop Mode [10/2015 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Navigation Receiver Assembly Communication Stop Mode [10/2015 - ]: Description

Detection Item Symptom Trouble Area
Navigation Receiver Assembly Communication Stop Mode Either condition is met:
  • "Display and Navigation (AVN1)" is not displayed on the CAN Bus Check screen of the Techstream

    Refer to PROBLEM SYMPTOMS TABLE [10/2015 - ]

  • Communication system DTCs (DTCs that start with U) that correspond to "Navigation Receiver Assembly Communication Stop Mode" in "DTC Combination Table" are output

    Refer to DIAGNOSIS SYSTEM [10/2015 - ]
  • Navigation ECU sub-assembly branch line or connector
  • Power source circuit of navigation ECU sub-assembly
  • Navigation ECU sub-assembly ground circuit
  • Navigation ECU sub-assembly
scientia non olet · About LEMON Manuals