| Steering Angle Sensor Communication Stop Mode |
Either condition is met:
- "Spiral cable (Steering Angle Sensor) " is not displayed on the CAN Bus Check screen of the Techstream (Refer to PROBLEM SYMPTOMS TABLE [10/2015 - ]
)
- Communication system DTCs (DTCs that start with U) that correspond to "Steering Angle Sensor Communication Stop Mode" in "DTC Combination Table" are output (Refer to DIAGNOSIS SYSTEM [10/2015 - ]
)
|
- Steering sensor branch line or connector
- Power source circuit of steering sensor
- Steering sensor ground circuit
- Steering sensor
|