Jam Protection Function does not Operate [10/2014 - ]: Procedure

1. Initialize the power window regulator motor assembly (applicable location) (Refer to INITIALIZATION [10/2014 - ] ).

Result: 

NEXT 

See step  2

1. Check if the power window auto up and down function operates normally (Refer to OPERATION CHECK [10/2014 - ] ).

   OK

   Auto up and down function is normal.

Result: 

NG 

GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) 

(Refer to PROBLEM SYMPTOMS TABLE [10/2014 - ] )

Result: 

OK 

See step  3

1. Check if the jam protection function operates normally for the applicable power window.

   HINT: 

   The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.

   OK

   Jam protection function operates normally.

   Result

   Result	Proceed to
   OK	A
   NG (Driver door power window)	B
   NG (Front passenger door power window)	B
   NG (Rear LH door power window)	C
   NG (Rear RH door power window)	C

Result: 

A 

END (PROBLEM DUE TO INITIALIZATION FAILURE) 

Result: 

B 

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR OR FRONT PASSENGER DOOR) 

(Refer to REMOVAL [10/2014 - ] )

Result: 

C 

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR REAR LH DOOR OR REAR RH DOOR) 

(Refer to REMOVAL [10/2014 - ] )