Customize Parameters [10/2014 - ]: Procedure
- CUSTOMIZE POWER WINDOW CONTROL SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make notes of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Power Window.
- Select the setting by referring to the table below.
Tester Display Default Content Setting Relevant ECU P Window Auto Up Avail This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly. Not Avl/Avail Power window ECU (Power window regulator motor assembly (for front passenger door)) P Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly. Not Avl/Avail Power window ECU (Power window regulator motor assembly (for front passenger door)) RR Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly (for RH door). Not Avl/Avail Power window ECU (Power window regulator motor assembly (for rear RH door)) RR Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly. Not Avl/Avail Power window ECU (Power window regulator motor assembly (for rear RH door)) RL Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly (for LH door). Not Avl/Avail Power window ECU (Power window regulator motor assembly (for rear LH door)) RL Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear LH door window using the multiplex network master switch assembly. Not Avl/Avail Power window ECU (Power window regulator motor assembly (for rear LH door))