DTC P062F: Internal Control Module EEPROM Error [10/2014 - 10/2015]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Clear DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).
5. Turn the engine switch off and turn the Techstream off.
6. Disconnect the Techstream.
7. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
8. Connect the cable to the negative (-) battery terminal.
9. Connect the Techstream to the DLC3.
10. Turn the engine switch on (IG).
11. Turn the Techstream on.
12. Select the following menu items: Powertrain / ECT / Trouble Codes.
13. Read DTCs.
    RESULT
    
    

    Result	Proceed to
    No output	A
    P062F	B

Result:

A 

CHECK FOR INTERMITTENT PROBLEMS 

(Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE [10/2014 - ] )

B 

REPLACE TCM 

(Refer to COMPONENTS [10/2014 - ] )