DTC B2313: Glass Position Initialization Incomplete [08/2013 - ]: Procedure

1. Initialize the power window regulator motor assembly (for driver door).

   Refer to INITIALIZATION [08/2013 - 08/2016] Refer to INITIALIZATION [08/2016 - ]

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  2

1. Turn the ignition switch off.
2. Wait for at least 10 seconds, and then turn the ignition switch to ON.
3. Check for DTCs.

   Refer to DTC CHECK / CLEAR [08/2013 - ]

   Body Electrical > D-Door Motor > Trouble Codes 

   OK

   DTC B2313 is not output.

   Result

   Proceed to
   OK
   NG

Result:  1

OK 

END (PROBLEM DUE TO INITIALIZATION FAILURE) 

Result:  2

NG 

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR). Refer to  REMOVAL [08/2013 - ]