DTC C1A01: Driving Support ECU [08/2016 - ]: Procedure

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [08/2016 - ]

   Body Electrical > Pre-Collision 2 > Clear DTCs 

2. Perform the following procedure.

   HINT: 

   If the following procedure is not performed, the previously output DTC cannot be detected.

   1. Turn the ignition switch to ON and wait 1 second or more.
3. Check for DTCs.

   Refer to DTC CHECK / CLEAR [08/2016 - ]

   Body Electrical > Pre-Collision 2 > Trouble Codes 

   Result

   Result	Proceed to
   DTC C1A01 is not output	A
   DTC C1A01 is output	B

Result:  1

A 

USE SIMULATION METHOD TO CHECK:  HOW TO PROCEED WITH TROUBLESHOOTING [08/2016 - 08/2017]  Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2017 - ] 

Result:  2

B 

REPLACE DRIVING SUPPORT ECU ASSEMBLY:  COMPONENTS [08/2016 - ]