Jam Protection Function does not Operate [08/2013 - ]: Procedure

1. Initialize the power window regulator motor assembly (for driver door).

   Refer to INITIALIZATION [08/2013 - 08/2016] Refer to INITIALIZATION [08/2016 - ]

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  2

1. Check if the power window auto up and down function operates normally.

   Refer to OPERATION CHECK [08/2013 - 08/2016] Refer to OPERATION CHECK [08/2016 - ]

   OK

   Driver door auto up and down function is normal.

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table):  PROBLEM SYMPTOMS TABLE [08/2013 - 08/2016]  ,  PROBLEM SYMPTOMS TABLE [08/2016 - ] 

Result:  1

OK 

See step  3

1. Check if the jam protection function operates normally for the driver door power window.

   HINT: 

   The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.

   OK

   Jam protection function operates normally.

   Result

   Proceed to
   OK
   NG

Result:  1

OK 

END (PROBLEM DUE TO INITIALIZATION FAILURE) 

Result:  2

NG 

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR). Refer to  REMOVAL [08/2013 - ]