DTC P0106: Manifold Absolute Pressure Circuit Problem [08/2014 - 08/2016]: Description
WARNING: This page is about a different variant/trim than selected.
The manifold absolute pressure sensor detects pressure inside the intake manifold as an absolute pressure with a built-in sensor and outputs it as voltage. Based on the voltage from the manifold absolute pressure sensor, the ECM controls the purge VSV and corrects any errors in the air fuel ratio due to change in pressure.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory |
|---|---|---|---|---|---|
| P0106 | Manifold Absolute Pressure Circuit Problem | Intake manifold pressure measured after engine start drops by less than 3 kPa(abs) [22.5 mmHg(abs)] compared to the intake manifold pressure (atmospheric pressure) measured before engine start (2 trip detection logic). |
|
Comes on | DTC stored |